|
Happy/Sad Ball Mallet |
Description: |
A wooden mallet with a 'happy' (bouncy) and 'sad' (rigid) ball attached to each end of the head. |
Notes: |
Bounce each side on the table to demonstrate the difference. Can also be attached to a post so that mallet swings down and hits brick. Hold mallet parallel to table and release: the 'happy' ball will knock over the brick; the 'sad' ball does not |
Location: |
LDR-F4. Two mallets are available. |
Image: |
'Happy' and 'Sad' sides are marked
|
Attach mallet to stand. Position near top of brick |
View from the read |
This striking position of the brick works well |
A thin rod held in place by a thicker rod
|