
The setup: DC battery, copper wire, rubber bands,
sand paper, safety pins, wood v-block, compass |

Wire cutters and Sharpie markers on instuctor's table
|

Extra parts on small bench by sink: magnets (leave
in box!),
small pieces of insulated wire, copper wire, rubber bands |

More extra parts: sand paper, nails, safety pins, compasses, wood blocks
|

The assembled motor in action |

Extra coils are left as samples |

Copper wire spool gets attached to small front bench near blackboard.
Note that the clamp remains attached to the bench; pack the rod and end clamp with the wire spool. |