Physics 104 Setup
Details:
Series & Parallel - DC Circuits
(click each photo for a larger image)
Return
to main setup page
 Stuff needed: Two small 7.5v bulbs, two multimeters (with sticky notes), two resistors (marked R1 and R2), DC power supply, knife switch, wires (four 24", three 12") |
 Two small bulbs, bulb holders, roach clips |
 Resistors and holders (R1 = 1.5kΩ; R2 = 5 kΩ) |
 Knife switch with 2 banana-to-pin connectors |
|
|
||
| © | St. Lawrence University | Department of Physics |
| Revised: 17 May 17 | Canton, NY 13617 |