Physics 152 Lab - Setup Instructions: Static Electric Charges

Physics 152 Set Up Instructions:
Experiments with Static Electric Charges
(click each image for a larger view)
Return to main setup page

Room setup
Note that this was set up in the Phy104 lab (Bewkes 204)
Stuff needed: fur, silk, glass beaker,
rubber rod, conducting spheres

Foil bits are stored on a piece of cardboard.
Old Oscilloscope

Foil on silk thread: Attach rod and
pendulum clamp to bench with large
clamp. Suspend foil on thread from
pendulum clamp
If pendulum clamps are not available
(they may be in use by the Phys 104 lab),
then use a burette clamp, small rod,
and right-angle clamp

Return To Setup Instructions

Room setup Note that this was set up in the Phy104 lab (Bewkes 204)	Stuff needed: fur, silk, glass beaker, rubber rod, conducting spheres
Foil bits are stored on a piece of cardboard.	Old Oscilloscope
Foil on silk thread: Attach rod and pendulum clamp to bench with large clamp. Suspend foil on thread from pendulum clamp	If pendulum clamps are not available (they may be in use by the Phys 104 lab), then use a burette clamp, small rod, and right-angle clamp


©	St. Lawrence University	Department of Physics