 Room setup |
 Timer, paper tape, masking tape and masses |
 The tape timer; replace carbon disc before Monday! |
 Attach small bench clamp as shown |
 Two 200 g masses with hooks and paper tape |
 Hooked mass detail |
 Place a stool (found in Bewkes 231 or 232, or in stockroom) by each setup |
 Install/remove 9V battery; don't leave them in the timer |
|
|
||
| © | St. Lawrence University | Department of Physics |
| Revised: 17 May 2017 | Canton, NY 13617 |