Physics 152 Lab - Setup Instructions: Systematic Error

Physics 152 Set Up Instructions:
Systematic Error
(click each image for a larger view)
Return to main setup page

Room setup
Stuff needed: dual DC power supply,
two multimeters, resistor set,
wires (four 24", one 12").

Use a dual power supply
Note push buttons in middle are set for series mode
If two 30 v supplies are used, they must
be connected in series

An ancient dual supply which requires
a jumper wire
Instructor demo: resistor, small wire coil
along with storage bag

Return To Setup Instructions

Room setup	Stuff needed: dual DC power supply, two multimeters, resistor set, wires (four 24", one 12").
Use a dual power supply Note push buttons in middle are set for series* mode*	If two 30 v supplies are used, they must be connected in series
An ancient dual supply which requires a jumper wire	Instructor demo: resistor, small wire coil along with storage bag


©	St. Lawrence University	Department of Physics