Basic Idea:
What: | How Many: | Where: | |
---|---|---|---|
Stuff From Last Week That Isn't Needed - Put Away | |||
Chunk of clay (small & large) | 1 each | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Clay holder for Force Sensor | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Modified Rubber Tip for Force Sensor | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Spring Bumper for Force Sensor | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Track Bracket | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
0.5-m meter stick | 1 | non-Majors storeroom, shelf AA2 | |
Short rod & base | 1 | non-Majors storeroom, shelf A3 | |
Meter stick clamp | 1 | non-Majors storeroom, shelf C3 | |
Stuff Left Over From Last Week - Leave in Place | |||
Vernier Dynamics Tracks (see Vernier hardware photos below!) |
1 | non-Majors storeroom, on top of the shelves | |
Vernier Cart without plunger Direction flipped from last week |
1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Dual-Range Force Sensor | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Motion Detector Direction flipped from last week (see setup diagram below) |
1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Motion Detector Reflector Flag | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier LabPro interface | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Motion Detector mounting bracket | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
New or Additonal Items Used This Week | |||
Vernier Track Bumper Direction flipped from last week (see setup diagram below) |
1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Cart with plunger | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Dual-Range Force Sensor - need a second one | 1 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Cart mass (rectangular) - 500 g | 3 | non-Majors storeroom, shelf E4, E5 or E6 | |
Vernier Screw and wingnut (attaches mass to cart) |
1 | non-Majors storeroom, shelf EE4, E5 or E65 | |
Vernier flag post & short screw (mounts force probe to cart) |
2 | non-Majors storeroom, shelf E4, E5 or E6 | |
Stuff Jeff Will Deal With | |||
Laptop computer & power bricks | 1 | Astronomy lab | |
Electronic Balance (2 kg @0.1 g) | 1 per lab bench | Majors storeroom |
Note to Jeff: Order 4 packs of EKG Electrodes if needed!
Needed next semester for EKG experiment!!
Vernier Hardware (photos courtesy Vernier Software & Technology) | |
Vernier LabPro Interface | |
Vernier Motion Detector | |
Vernier Motion Detector Reflector Flag | |
Vernier Dual-Range Force Sensor | |
Vernier Cart (w/plunger) | |
Vernier Cart (w/o plunger) | |
Vernier cart mass, screw & wingnut | |
Vernier Dynamics Track, adjusting legs & Adjustable End Stop (track bumper) | |
Vernier Motion Detector Bracket |
|
||
© | St. Lawrence University | Department of Physics |
Revised: 01 Nov 2019 | Canton, NY 13617 |